ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
Table 3-3.2. Mission Procedures (GPS) - Continued
Step
Reference
no.
Operation action
Status indicators
CDU data display
d.
Stow equipment
OR:
a.
Hang plumb bob from suspension point
b.
Maneuver vehicle so plumb bob is
directly above a pre-established survey
marker
c.
Stow equipment
d.
Press STOP
e.
Press MARK (if 2 POS C-E appears on
C-E
display, press CLR)
f.
Press CLR; PADS marks position
PAUSE
ID*PAE 2-2
PADS records position and shows re-
g.
suits of the first position of a 2-position
azimuth mark and is ready to move after
indicator has flashing "GO"
Drive vehicle toward second point re-
h.
(Radial distance
quiring survey; press ID, 0, ENT, DIST from first point)
Maneuver vehicle so plumb bob is
i.
STOP GO Z-VEL
directly over second point to be estab-
3-22.19
lished and press STOP. (Distance must
beat least 100 meters from the first
point.)
Press MARK
MARK, ENT
2 POS C-E
j.
k.
Press ENT; PADS marks position
PAUSE
PADS records position, azimuth, eleva-
l.
ID*PAE 222
tion, and shows result of mark
m.
Set witness and hub stakes, taking care
to locate hub indent exactly beneath the
plumb bob
n.
Stow all equipment
Drive to next position, performing zero-
o.
velocity corrections as necessary
11.
MARKING - POSITION AND
ELEVATION (using theodolite)
a.
Stop vehicle, press STOP
b.
Set up theodolite over point to be estab-
lished
c.
When ready to move ("GO"), maneuver
vehicle and achieve autoreflection
Change 3
3-36.29
Previous Page
