ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
Table 3-3.2. Mission Procedures (GPS) - Continued
Step
Reference
Status indicators
Operation action
CDU data display
no.
b.
Stop vehicle; press STOP
Press UPDT
GPS C-E
c.
C-E
UPDT ENT
Press CLR
d.
Press CLR; PADS cues for easting
"E"0:
.0
e.
f.
Press CLR
"EL"
.0
Z-VEL
Enter elevation; PADS accepts elevation
PAUSE
g.
data
ID*PAE --U
h.
PADS shows update results and is ready
to move after indicator has flashing
"GO"
7.
GPS UPDATE POSITION AND
ELEVATION - ANTENNA ON
VEHICLE (AOV)
NOTE
PADS can be updated at its present
position.
a.
If the vehicle had been moving, bring to
a halt and press STOP
NOTE
Ensure that the GPS receiver is being
operated in the same datum (and refer-
ence ellipsoid) as PADS. If not, reselect
the GPS datum to match PADS.
STOP Z-VEL UPDT ENT
Press UPDT
b.
GPS C-E
Press ENT
DIFF C-E
c.
Press CLR if not a differential GPS up-
d.
FOM "1-9"
date
Record data from GPS receiver by mak-
e.
ing a GPS mark or freezing the data.
Note the FOM value
f.
Enter the FOM value
1 = less than 25 meters
2 = less than 50 meters
Press ENT
AOV C-E
g.
NOTE
The GPS receiver must be mounted on
the vehicle for this example.
PAUSE
h.
Press ENT
"E"0:
.0
3-36.25
Change 3
Previous Page
