ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
Step
Reference
CDU data display
Status indicators
Operation action
no.
NOTE
This table summarizes PADS opera-
tional sequences in the UTM coordinate
system only. More detailed descriptions
are in the paragraphs and tables listed in
the reference column.
DAILY CHECKS AND SERVICES
1.
a.
Check that primary pallet, battery box,
2-12, 2-13
and CDU are securely mounted
Inspect fluid level of vehicle and PADS
b.
batteries. Replenish as necessary
c.
Check that primary pallet is properly
2-12, 2-13,
connected to vehicle power, battery box,
2-14
and CDU
d.
Check for proper operation of flashlight
e.
Clean porro prism
f.
Check that all equipment is properly
2-12, 2-13,
stowed and does not block airflow to
2-14
PADS or interfere with vibration iso-
lated units
Check that PS BATTERY and
g.
VEHICLE circuit breakers CB1 and
CB2 are OFF
h.
Start vehicle engine and verify proper
operation of vehicle electrical system
INITIALIZATION
2.
a.
Check that PS is connected to vehicle
power using cable assembly W7
2-12, 2-13,
2-14
b.
Set PS BATTERY and VEHICLE cir-
cuit breakers CB1 and CB2 to ON
PADS must not be moved for at least
one minute after tumon. Failure to do
this may result in severe damage to the
equipment.
Note below
STOP. ENT
GPS C-E
Press ON/OFF
c.
Change 3
Previous Page
