ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
Table 3-2. Mission Procedures - Continued
Step
CDU data
Status
no.
Operator action
display
indicators
Reference
h.
Drive vehicle toward second
(Radial
point requiring survey; press
distance from
ID, 0, ENT, DIST
first point)
Maneuver vehicle so plumb bob is
i.
directly over second point to be
established and press STOP. (Dis-
Z-VEL
tance must be at least 100 meters
from the first point.
Press MARK
2 POS C-E
MARK, ENT
j.
k.
Press ENT; PADS marks position
PAUSE
l.
PADS records position, azimuth,
ID PAE 222
elevation, and shows result of mark
m.
Drive to next position,
performing zero-velocity
corrections as necessary
MARKING - POSITION AND
10.
Note a,
ELEVATION (Using
theodolite)
NOTE
If azimuth appears after update.
disregard.
Stop vehicle, press STOP
a.
Z-VEL
b.
Set up theodolite over point to
be established
When ready to move ("GO"),
c.
maneuver vehicle and achieve
autoreflection
d.
Press STOP
Z-VEL
Press MARK (if 2 POS C-E
e.
C-E
MARK, ENT
appears on display, press CLR)
Z-VEL
Press E N T
f.
"READ"
alternate for
64 seconds
Press CLR (to bypass 64-second
"D"
g.
motion test). PADS will cue
for distance
Change 2
Previous Page
