ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
Table 3-2. Mission Procedures-Continued
Step
CDU data
Status
indicators
Reference
no.
Operator action
display
NOTE
The following steps check the PADS
battery operation under load. While it
may be performed at any time during a
mission, it is suggested that it be per-
formed at the beginning of the mission to
minimize impact if a defective battery
is found.
While PADS is operating, note CHRG
a.
indicator is not lighted continuously
Disconnect vehicle power by setting PS
b.
VEHICLE circuit breaker CB2 to OFF.
PADS should remain operating
BATT
c.
After 30 seconds of battery operation,
set VEHICLE circuit breaker CB2 to
ON
CHRG
NOTE
Steps d thru g are performed if system
has a solid state memory and steps h
and i are performed if system has a core
memory.
Press O N / O F F
d.
SAVE C-E
CAUTION
Do not attempt to remove power or force
a system shutdown during the PAUSE
command. Memory data is being trans-
ferred during this time.
Press E N T
PAUSE
e.
W h e n display indicates "OFF" E,
f.
press O N / O F F
OFF "E"
(All displays darken)
Press E N T
OR:
Press O N / O F F
OFF C-E
h.
(All displays darken)
Press E N T
i.
Change 2
3-34
Previous Page
