ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
Table 3-2. Mission Procedures - Continued
Step
CDU data
Status
no.
Operator action
display
indicators
Reference
h. Measure and record offset
distance
i.
Press DIST
D
Note a,
Enter distance
PAUSE
j.
k.
PADS shows mark results
ID PAE 1-1
l.
Stow equipment, and proceed
with mission after indicator
has flashing "GO"
11.
MARKING - POSITION,
Note b,
AZIMUTH, AND
ELEVATION (Using
theodolite)
a.
Stop vehicle; press STOP
Z-VEL
b. Set up theodolite over point to
be established
c.
When ready to move, ("GO"),
maneuver vehicle and achieve
autoreflection
d . Press STOP
Z-VEL
e.
Press MARK
C-E
MARK, ENT
Z-VEL
f.
Press E N T
"READ"
alternate for
64 seconds then
.00
Measure and record horizontal
g.
angle and offset distance
h. Without disturbing vehicle, press
PAUSE
PADS will automatically
check for azimuthal motion.
before
Display must be
this step will be accepted
i.
Azimuth motion within limits (if
motion is excessive, display
C-E and
will revert back to
steps f and h must be
repeated)
3-32
Previous Page
