ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
Table 3-2. Mission Procedures - Continued
Step
CDU data
Status
display
no.
Operator action
indicators
Reference
"D"
.0
Enter horizontal angle. PADS
Note a,
j.
cues for distance
D
k.
Press DIST
PAUSE
Enter distance
l.
ID PAE 111
m.
PADS shows mark results
Load survey equipment and
n.
proceed on mission when
indicator has flashing "GO"
12.
DATA RECALL
a.
Press ID
--(Last display)
Enter ID number of desired
10(Last display)
b.
data. (Example: ID10)
Press E N T
c.
10( New display)
Press for data desired. (Example:
10EXX:XXXXXX.X
d.
for easting, press E.) Azimuth
information will only be
available for those ID's where
an azimuth was marked. Refer
to note preceding step 10a.
Dashes will be displayed for grid
or true azimuth in those ID's
where only position and
elevation are marked
An alternate procedure to recall
e.
data is to press +2 to
increase the ID number by
one or press - 8 to decrease
the ID number by one
13.
SHUTDOWN
To prevent damage, do not move
or restart PADS for at least 2 min-
utes after shutdown.
Change 2
3-33
Previous Page
