TB 55-1905-202-34/1
Figure 7. After terminal box.
bulkhead of deckhouse (fig. 7), with the terminal box
f. Touch-up paint, as described in TB 746-934,
holding the three mounting screws in place. Tackweld
should be applied to all areas on the mast where
the mounting screw heads to the bulkhead. Remove
required.
terminal box and finish welding screw heads
permanently in place (fig. 8). Reassemble terminal box
11. Terminal Box and Pipe Coupling Preparation
(16, fig. 7) and mounting hardware to the mounting
screws. See figure 8.
10
Previous Page
