Figure 6. Transmitter keying plate.

TB 55-1905-202-34/1

Figure 6. Transmitter keying plate.

c. Mate connector of transmitter with transmitter

Assemble completed transmitter case to the adaptor

plate using appropriate mounted hardware (fig. 4).

cable connector; install transmitter (59, fig. 4) and

transmitter keying plate (2, fig. 6). Secure firmly

e. Route and attach transmitter case cable (50,

against each other, and secure both in place with

figs. 4 and 7), to the mast using fitted tube clips (53,

mounting hardware (41) and (34).

figs. 2, 4, and 7) and the brass screws and lockwashers

d. Assemble gasket (5, fig. 4) and access cover

(54 and 55, fig. 2).

(3) in place with mounting hardware (40 and 33).