TB 55-1905-202-34/1
10. Transmitter Case Preparation
g. Drill and tap twelve (12) each holes to mount
tube clips using No. 25 diameter drill bit and No. 10-24
NC tap. Attach adapter plate (52, fig. 4) and adapter
to case (1); see figure 5. Assemble transmitter cable
plate gasket (17), to the mast bracket plate using the
(50, fig. 4) to connector bracket (6) with mounting
appropriate mounting hardware as shown in figures 3
hardware (fig. 4).
Figure 5. Stuffing tube assembly.
over transmitter cable and into case stuffing tube.
Secure cap on stuffing tube.
assemble connector bracket (6, fig. 4) to case (1) with
8
Previous Page
