Figure 4. Transmitter mounting.

TB 55-1905-202-34/1

four (4) each 3/8 inch diameter holes in the mast

bracket plate under the three arc-shaped slotted holes

for clearance.

bracket plate as previously located.

e. Locate and mark the lower tube clip (53, fig. 2)

f. Using appropriate cutting tool(s) clear out the

mounting holes on the mast; equally space and mark

three-arc-shaped slotted hole clearance areas marked

the remaining four (4) tube clips between the upper and

above. Enlarge the marked area sufficiently to allow

lower clamps. Remove mast assembly from boat. Drill

clearance of the transmitter case mounting hardware,

(29 and 35, fig. 4).

Figure 4. Transmitter mounting.

Index