TM5-1260-206-34
Table 2-10.APPS System Fine Alignment Procedures - Continued
STEP ITEM
NO.
PROCEDURE
30
Guide bar (3)
Remove by doing the following:
a. Loosen clamps (6) and (7).
Move photo-carriage to left and press guide bar down.
b.
c. Relocate clamp (5) to end position.
31
Block (2)
Remove two knurled screws. Remove block.
32
Bar (1)
Remove bar.
Remove two knurled screws.
33
DAC bottom cover plate
Replace and secure with 24 screws and washers.
34
DAC top cover plate
Replace and secure with 24 screws and washers.
2-48
Previous Page
