TM5-1260-206-34
Table 2-11. Connectors Maintenance Procedures
STEP ITEM
NO.
PROCEDURE
CHASSIS CONNECTOR REMOVAL
1
Chassis
Disassemble as required to gain access to connector.
(See chapters 3 through 7.)
2
Connector
Remove by doing the following:
a. Unsolder and tag with destination labels all wires attached
to connector pins.
Remove screws, washers, and nuts attaching connector to panel.
b.
c. Remove connector.
CHASSIS CONNECTOR REPLACEMENT
Connector
3
Replace by doing the following:
Insert connector through cutout in panel.
Secure with screws,
a.
washers, and nuts.
Resolder wires to connector pins according to destination tags.
b.
c. Using a multimeter, check for O ohms resistance through
replaced connector. (See chapters 3 through 7.)
4
Chassis
(See chapters 3 through 7.)
Reassemble as required.
CABLE CONNECTOR
2-49