TM 11-5826-225-35
2-15. Isolating Trouble Within Stage
If the trouble has been traced to the inverter
through the checks made in paragraph 2-14, use
the following techniques to isolate the stage or
part at fault.
a . Test the transistors with Transistor
Tester TS-1836/U (figs. 2-25 and 2-26).
b. Make voltage measurements on the tran-
sistors and compare them with those given in
transformers and coils (d below).
c. If necessary, adjust R1 for 26 2.0 volts ac.
Figure 2-24. Mounting with inverter installed.
Change 5 2-41
Previous Page
