ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
(b) Loosen (turn counterclockwise) two screws
(c) Use card extractor to remove memory unit
(8) securing wedgelock (9) until memory
unit (7 or 7. 1) is free.
(2) Replacement.
NOTE
NOTE
It may be necessary to loosen the wedges
Inspect mating connectors for bent or
broken pins before installing a memory
if they become frozen. This can be done
by simply tapping the wedge screws
unit.
downward until the bottom wedges be-
(a) Install memory unit (7 or 7.1) as follows:
come loose. The top wedges may be loos-
1. Insert memory unit into slot in computer
ened by placing a 1/8-inch straight-slot
with wedge-locks facing to the rear of
screw driver between the memory upper
computer and carefully guide it into
wedge and the computer outside case,
place.
prying the wedge inward until loose.
Change 7
Previous Page
