TM 5-6675-270-15
Section XX. LEFT-SIDE SUPPORT COVER ASSEMBLY
ing solvent. Clean the glass window with lens
tissue.
The left-side support cover assembly contains the
b. Inspection. Inspect the mirror mount, cover,
and plug-in lamp bushing for dents, breaks, and
bushing. The left-side support cover also protects
excessive wear. Inspect all threaded surfaces for
the collimation level arm assembly.
damaged threads and wear.
c. Repair. Remove all burs. Replace defective
a. Remove the left-side support cover assembly
parts that cannot be repaired.
left-side support cover assembly.
side support cover assembly.
6-79. Cleaning, Inspection, and Repair
b. Install the left-side support cover assembly
a. Cleaning. Clean all metal parts with a clean-
Section XXI. VERTICAL COLLIMATION HOUSING AND
VERTICAL COLLIMATION LEVER ASSEMBLIES
6-83. Cleaning, Inspection, and Repair
a. Cleaning. Clean all metal parts with a clean-
limation lever assemblies are located in the left-
ing solvent. Clean and polish the prism and lenses
side of the U-frame. They contain the upper and
with a lens tissue dipped in grain alcohol or
lower vertical circle reading prisms and lens as-
acetone.
semblies, the upper horizontal circle reading prism
b. Inspection. Inspect the housing, bearing
assembly, prisms and lenses.
shell, and sleeve for cracks, dents, and excessive
wear.
c. Repair. Replace defective parts that cannot
be repaired.
the vertical collimation lever as an assembly (para
collimation housing and vertical collimation lever
vertical collimation housing and vertical collima-
assemblies.
tion level assemblies.
VERTICAL CiRCLE ASSEMBLY
Section XXII.
6-87. Cleaning, Inspection, and Repair
The vertical circle assembly is located on the left
a. Cleaning. Clean all metal parts with a clean-
.
side of the U-frame and is connected to the tele-
ing solvent. Clean the vertical circle with a clean,
scope axis to provide vertical readinga for the
soft cloth moistened with a cleaning solvent, or
operator.
use lens tissue. (Clean all threaded surfaces with a
brush moistened in cleaning solvent.
b. Inspection. Inspect the circle for breaks,
a. Remove the
vertical circle assembly (para
etchings, or other visible damage. Inspect the
hardware for damaged threads.
vertical circle assembly.