TM 5-1260-206-12
APPS Disassembly Procedures - Continued
Table 2-5.
STEP ITEM
NO.
PROCEDURE
Monocular with eyepieces (5)
11
a. Loosen two knurled screws (6).
b. Pull monocular straight out from mounting plate assembly.
If zoom eyepieces are installed,
c.
remove and replace with fixed
eyepieces from case 5.
Pack zoom eyepieces in case 5.
d.
Pack monocular in case 5.
e.
Mounting plate assembly (7)
12
a.
Loosen screw (8).
Remove plate assembly and pack in case 5.
b.
Prism holder (9)
13
Through bolts (2 each) (10)
Loosen both through bolts.
a.
b.
Remove bolts and pack in case 5.
c.
C a r e f u l l y lift prism off large
mirror assemblies (11).
Pack prism holder in case 5.
d.
Large mirror assemblies (2 each) - Remove both mirror assemblies and pack
14
in case 5.
Measuring mark bridge (12).
15
Measuring marks (2 each)
Loosen two knurled screws (13) and remove measuring mark bridge.
a.
b.
Remove both measuring marks by pulling them straight out from
bridge.
2-45
Previous Page
