removed from the connector on the re-
3-14. Removal and Replacement of Dc-to-Ac
ceivcr mount.
Inverter on Receiver Mount
b. Replacement.
Caution: Before removing receiver, discon-
(1) Place the dc-to-ac inverter in the receiver
nect aircraft dc power connected from direction
mount, making certain the potentiometer
finder set.
side is up and the dc-to-ac inverter con-
a. Removal.
nector mates perfectly with its mating con-
(1) Remove the receiver (para 3-13a).
nector on the receiver mount.
(2) Remove the two screws that hold dc-to-ac
Caution: The connectors may be dam-
inverter to receiver mount.
aged if not properly aligned.
(2) Carefully tighten the two screws that hold
(3) Grasp top and bottom of dc-to-ac inverter
dc-to-ac inverter to receiver mount.
and pull forward from receiver mount. It
Note. Do not adjust the potentiometer.
may be necessary to rock the dc-to-ac in-
(3) Replace the receiver (para 3-13b).
verter gently back and forth as it is being
22
Previous Page
