TM 5-1260-206-34
TID Troubleshooting Procedures - Continued
Table 7-2.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
If voltage is not present at both pins, refer to
faulty wire or connector. Replace faulty component.
Check that malfunction is corrected.
Step 3.
If not, refer faulty TID to depot maintenance
personnel.
LEFT OR RIGHT PHOTO PLATE MOVEMENT RESTRICTED
3.
(See table 2-1.)
Verify that malfunction exists.
Refer faulty TID to depot maintenance personnel.
7-4
Previous Page
