TM 5-1260-206-34
7-7. TROUBLESHOOTING PROCEDURES - Troubleshooting the TID consists of iso-
l a t i n g the faulty part. Table 7-2 lists troubleshooting procedures for the
TID. If a malfunction is not listed or is not corrected by procedures given
in the table, refer to the TID interconnecting diagram (figure 7-1) and the
system interconnecting diagram (F0-7).
Voltages as high as 750 volts are produced by the TID lamp
control assembly. Contact with this voltage potential can
result in death. Never place hands or meter leads inside
control assembly unless power switch is set at OFF.
TID Interconnecting Diagram
Figure 7-1.
7-2
Previous Page
