TM 5-1260-206-12
Table 3-2. Troubleshooting Procedures
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
APPS
1.
Obtained Readings Out of Tolerance
Step 1.
Perform IDP 03 diagnostic.
(See table 3-5. )
If performed successfully, do step 2.
If not performed successfully, refer system to DS/GS
maintenance personnel.
Step 2.
Perform IDP 01 diagnostic.
(See table 3-6.)
I f performed successfully, no equipment fault exists.
Refer to PPDB operator's manual to verify procedures.
If not performed successfully, refer OMS to DS/GS
maintenance personnel.
2.
System Degradation Suspected
Step 1.
Perform IDP 03 diagnostic.
(See table 3-5.)
If performed successfully, do step 2.
If not performed successfully, refer equipment to DS/GS
maintenance personnel.
Step 2.
Perform IDP 01 diagnostic.
(See table 3-6.)
If performed successfully, no degradation exists.
If not performed successfully, refer OMS to DS/Gs
maintenance personnel.
DIC
3.
One Pushbutton Indicator Not Lit
Check that other pushbutton indicators are lit.
I f lit, replace faulty lamp.
(See table 3-7.)
If out, see item 4.
3-3
Previous Page
