TM 11-6605-202-12/TO 5N3-3-10-1
CLEANING (continued)
CAUTION
Damaged scale markings may result.
e. Clean the indicator and meter
faces; use a soft clean cloth.
If dirt is difficult to remove,
dampen the cloth with water;
mild soap may be used to
make the cleaning more ef-
fective.
PAINTING
chipped or corroded, refer to TB 746-10 and TB 43-0118 for the correct cleaning and refinishing practices.
NOTE
Refer to Appendix E for material identification and ordering information.
a.
Remove rust and corrosion from metal surfaces by lightly sanding them with #000 sandpaper.
b.
Apply pretreatment coating to bare metal surfaces.
c.
Brush two thin coats of Lusterless Enamel on the bare metal to protect it from further corrosion.
d.
Restore white engraved markings on the gyro with white epoxy ink.
EXPENDABLE SUPPLIES & MATERIALS
Refer to Appendix E for a listing of supplies and consumable materials.
4-6.
Previous Page
