TABLE 5-1. INSPECTION PROCEDURES FOR COMPASS CALIBRATOR (cont)
Remedial Action
Procedure, Check For:
Unit
Touch up scratches and chips
Dents, scratches, chips in case and
Field Tester
with yellow gloss enamel.
panel, damaged latches or handles.
(Federal Specificaticm TT-L-58,
Type II; Federal Standard No.
595, Color 13538).
Replace damaged parts
Replace defective parts.
Missing or broken knobs, damaged
connectors, switchee, controls, and
broken wires.
Tighten loose parts.
Mounting security of all parts.
Replace damaged cables.
Broken or frayed cable insulation,
broken connector shells, damaged
Replace missing screws.
pins and missing screws, broken
lenses in telescope, and damaged
Replace telescope or damaged
swivel joint or screw threads in
parts.
magnetic azimuth reference detector.
Figure 5-1. Lubrication Points
5-4