TABLE 5-1. INSPECTION PROCEDURES FOR COMPASS CALIBRATOR (cont)
Unit
Procedure, Check For:
Remedial Action
Monitor and Case
Scratches, chips, and bent hinges.
Touch up as necessary with gloss
Assembly
yellow enamel (Federal Specifica-
tion TT-L-58, Type II; Federal
Loose adjustment screws, broken or
loose lenses, damaged levels, broken
Standard No. 595, Color 13538).
connector, stripped screw threads,
missing or broken azimuth scale covers,
Straighten bent hinges.
bent or twisted parts, and binding of fine
adjustments.
Tighl en loose screws.
Unscrew Monitor from slideboard to
Return Monitor to depot for
inspect connector 1J5.
repair and replacement.
Turntable and Case
Tighten loose screws.
Loose or missing adjustment screws,
Assembly
damaged levels, damaged connectors,
missing or damaged azimuth scale
Return Turntable to depot for
repair and replacement.
covers, any bending or twisting and
binding of fine adjustments.
Unscrew Turntable from slideboard to
inspect tonne ctor.
Alignment Equipment
Scratches j chips, broken lenses, stripped
Touch up as necessary with
screw threads, and binding of fine ad-
yellow gloss enamel (Federal
justments.
Specification TT-L-58, Type If;
Federal Standard No. 595,
color 13538).
Adapter Box
Scratches, chips, damaged connectors.
Touch up as required with
with yellow gloss enamel
Remove bottom cover to inspect for
(Federal Specification TT-L-58,
fungus, corrosion, secure solder con-
Type II; Federal Standard No.
nections, broken wires, and damaged
595, Color 13538).
insulation.
Replace damaged wires, con-
nectors, and insulation.
Clear off fungus and corrosion
using crocus cloth (Federal
Specification P-C-458).
5-3