Junction Box and Fuseholder Preparation.

TB 55-1905-202-34/1

b. Assemble indicator mounting plate (10, fig. 14)

b. Locate and drill fuseholder mounting holes as

and gasket (11) in place with appropriate mounting

hardware as shown in figure 14.

NOTE

13. Junction Box and Fuseholder Preparation.

All welding and cutting is now

complete in pilothouse; print

a. Locate and weld in place the 15 weldnuts (9, fig.

touchups should be made at this

2) so that the cable (49, fig. 1) will be routed and

time.

supported by cable clamps (8, fig. 7)