C 3, TM 9-1290-335-35
d.
Install items 3, 2 and 1.
5-21. Installation and Assembly of Related Parts-
e.
Adjust stud (11) by sliding up or down in
Housing Assembly 10954707
housing hole, to aline gear (2) ,with gears (1) and (3).
a,.
Install stud (11 fig. 5-6) and setscrew (10)
Rotate gear (2) to establish proper mesh and tighten
do not tighten.
setscrew (10).
b.
Install gear (9) and drive in pin (8).
c.
Assemble items 7 through 4.
1-
Screw hex hd: No. 3/8-16, 7/8 Ig
3-
Shim, as required
6-
Gear
(3)
4-
Shaft and related parts
7-
Shaft
2-
Housing assembly
5-
Pin spring, 0.156 dia, 1.125 Ig
Figure 5-7. Removal of Housing Assembly 10954707 and housing assembly 10954711--partial exploded view.
5-9
Previous Page
