C 3, TM 9-1290-335-35
1
Gear (hub)
5
Gear
9
Gear
2
Gear assembly idler
6
Gear assembly intermediate
10
Setscrew: hdls, 1/4-20, 0.250 Ig
3
Shaft 53445727 and related parts
7
Shaft 5345727
11
Stud
4
Pin, straight, taper groove, 7/64
8
Pin, straight, taper groove,
od, 5/8 Ig
11/'64 od, 1.00 Ig
Figure 5-6. Disassembly of Housing 10954707 and Related Parts-partial exploded view.
b.
Remove item 4 and disassemble 5 through
5-20. Installation of Housing Assembly 10954707
7.
and Related Parts
c.
Inspect bearing which is not removed from
Note
the housing 10954705 for excessive wear or damage.
All gear teeth to be coated with
d.
Inspect bushing 5345777, which is not
grease MIL-G-10924 at assembly or
removed from the housing 10954705, for excessive
installation.
wear or other damage.
a.
b.
Install items 4 through 1.
5-8