TM 55-1905-223-24-14
(2)
Position replacement lamp (2) in lampholder, push in, and turn clockwise to secure.
b. Fuse.
(1)
Remove fuse cartridge from fuseholder cap (3) and discard.
(2)
Insert replacement fuse cartridge into fuseholder cap.
ASSEMBLY
a. Lamp.
(1)
Thread lampholder lens on lampholder and secure by turning clockwise.
(2)
Set POWER switch (4) to up position. POWER lamp (2) should light red.
b. Fuse.
(1)
Position fuseholder cap with fuse cartridge into fuseholder on relay transmitter (1), push in and turn
clockwise to secure.
(2)
On pilothouse IC/ELEX PANEL, set circuit breaker No. 4 (MK 27 HEADING XMTR) to ON. Remove "Out
of Service, Do Not Operate" tag.
(3) On relay transmitter (1) set POWER switch (4) to on (up). POWER lamp (2) should light red.
2-38
Previous Page
