ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
(6) Close crimping tool handles until stop hits the
(b) Turn knurled screw until index line on nest
other handle.
die is aligned with proper cable size on
cable scale.
(7) Open crimping tool handles and remove
crimped terminal. Tug on terminal to make
(c) Lock nest die by tightening nest die lock
sure it is firmly crimped.
screw.
(8) Replace insulating tubing as required.
(4) Insert stripped end of cable into lug barrel.
(5) Insert cable and terminal assembly into the
open nest die so the terminal barrel is cen-
tered in the die. See figure 4-33.
Previous Page
