ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Table 4-18.1. Operational Program Loading Using Tape Reader, Part No. 877406-2 Continued
Malfunction
indication/corrective action
Normal indication
Test procedure
av. Turn on PADS via CDU and
advance to monitor mode
NOTE
Zeros may be entered for values of
survey parameters.
aw. After elevation is entered press Data display shows:
MON, ID, 1, 4, ENT pushbut- 14 MCS XXXXX (checksum)
tons
Checksums are not the same: Reload
ax. Compare CDU checksum read- Checksums are equal
operational program
out to the program checksum
written on front of the opera-
tional program tape
NOTE
Loading of the operational program is complete and has been verified. The equipment can be reconfigured as
required . If an IMU has just been recalibrate the memory unit normally is removed from the computer and stored
with the IMU in an IMU transit case.
4-106.6 Change 1
Previous Page
