ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Table 4-18. Operational Program Loading Continued
Malfunction
indication/corrective action
Normal indication
Test procedure
ae. Press REVERSE switch-indica-
REVERSE switch-indicator lights
tor to on
Tape rewinds and stops at beginning
REVERSE switch-indicator goes off
af. Press REVERSE switch-indicator
to off
VERIFY ERROR switch-indicator
VERIFY switch-indicator lights
ag. Press VERIFY switch-indicator
lights and tape stops: Refer to step
to on
Tape reader reads tape and stops at
2h of table 4-6
end
ah. Press VERIFY switch-indicator
to off
REVERSE switch-indicator lights
ai. Press REVERSE switch-indicator
to on
Tape rewinds and stops near begin-
ning
REVERSE switch-indicator goes off
aj. Press REVERSE switch-indicator
to off
ak. Set tape r e a d e r SPOOLING
switch to DISABLE
al. Remove IMU alignment tape
from tape reader and store in
IMU compartment
am. Press EXECUTE switch-indica-
tor to on
am.1. Wait 15 seconds and press
EXECUTE switch-indicator
to off
System turns off
an. Sequentially press O N / O F F
s w i t c h - i n d i c a t o r and ENTER
switch
ao. Set BATTERY and VEHICLE
circuit breakers CB1 and CB2 to
OFF
SPU ON switch-indicator goes off
ap. Press SPU ON switch-indicator
to off
aq. Disconnect W204 from com-
puter and connect CDU cable
W1 to computer
ar. Turn on PADS via CDU and ad-
vance to monitor mode
NOTE
Zeros may be entered for values of
survey parameters
Change 1
4-105
Previous Page
