ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
1. THIS STEP REQUIREDONLYWHEN REPLACING
AN INSERT THE FIRST TIME. ENLARGE HOLE IN
SUBFLOOR PLATE WlTH 9/16 IN. DRILL BIT. BE
CAREFUL TO DRILLJUSTTHRU SUBFLOOR
PLATEANDMINIMIZE REMOVALOF MATERIAL
FROM BLOCK.
2. DRILL INSERT WITH 11/32 IN. BIT TO A DEPTH
OF 3/16 IN. TO EXPOSE KEES.
3. DEFLECT KEES INWARD AND BREAK OFF.
4. REMOVE THREADED INSERT WITH SCREW
EXTRACTOR.
6. INVERT TOOL OVER KEES. TAP TOP OF TOOL
5. SLIDE INSERT ONTO INSERTION TOOL AND
WITH HAMMER UNTIL KEES ARE DRIVEN FLUSH
THREAD INSERT INTO BLOCK UNTIL BOTTOM
WITH TOP OF INSERT. REMOVE TOOL.
EDGEOFKEESCONTACT THE COUNTERSINK
IN THE BLOCK.
Previous Page
