ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
44-902-34
NOTE
Disconnect cable assembly W 1 conector
(a)
W1P1 from CDU (4) connector 4J1.
If CDU (4) is being stored on top of
(b) Release clamping catches securing CDU (4)
computer, remove as described in previ-
to computer (5) if CDU is being stored on
ous paragraph.
top of computer. If CDU is mounted on
(b) Loosen four captive screws (3) securing
utility truck dashboard, release clamping
computer power supply (6) to computer
catches securing CDU to CDU bracket.
mounting base (12). Remove computer (5)
(2) Replacement.
with computer power supply (6).
(a) Secure CDU (4) to top of computer (5) or to
(2) Replacement.
CDU bracket on utility truck dashboard.
(a) Place computer (5) with computer power
(b) Connect cable assembly W 1 connector
supply (6) on computer mounting base (12).
W1P1 to CDU (4) connector 3J1.
Align mounting holes.
b. Computer. Remove and replace computer (5,
(b) Tighten four captive screws (3) securing
computer power supply (6) to computer
mounting base (12).
Removal.
(1)
(c) See figure 3-1 and connect cables to com-
(a) See figure 3-1 and disconnect cables from
puter as follows:
computer as follows:
1. Connect cable assembly W 1 connector
1. Disconnect cable assembly W 1 connector
W 1P2 to computer connector 1J3.
W1P1 from computer connector 1J3.
2. Connect cable assembly W2 connector
2. Disconnect cable assembly W2 connector
W2P2 to computer connector lJ1.
W2P2 from computer connector lJ1.
3. Connect cable assembly W3 connector
3. Disconnect cable assembly W3 connector
W3P2 to computer connector 1J4.
W3P2 from computer connector 1J4.
Previous Page
