CHAPTER 1 INTRODUCTION - TM-5-6675-308-340025

Figure 1-1. Auxiliary Equipment

TM-5-6675-308-34 Position and Azimuth Determining System An/USQ-70 Manual
Page Navigation
1

ARMY TM 5-6675-308-34

MARINE CORPS TM 08837A-34/2

CHAPTER 1

INTRODUCTION

Section I. GENERAL

1-1. Scope. This manual contains information required

1-6. Reporting Equipment Improvement Recommen-

dations (EIR). EIRs can and must be submitted by

to maintain, test, troubleshoot, and repair the Position

and Azimuth Determining System AN/ USQ-70 (PADS)

anyone who is aware of an unsatisfactory condition with

at the direct support and general support levels. Func-

the equipment design or use. It is not necessary to show

tional descriptions, block diagrams, tools and material

a new design or list a better way to show a new design

lists are provided to support these functions as dictated

or list a better way to perform a procedure, just tell

why the design is unfavorable or why a procedure is

by the Maintenance Allocation Chart (Appendix D of

TM 5-6675-308-12). Marine Corps users shall refer to

difficult. Army users may submit EIRs on SF (Standard

Appendix .4 of TM 08837A-12/1. Repair parts and

Form) 368 (Quality Deficiency Report) to:

special tools required are listed in TM 5-6675-308-24P.

Commander, U.S. Army Troop

Marine Corps users shall refer to TM 08837A-24P/3.

Support Command

ATTN: AMSTR-MOF

1-2. Maintenance Forms and Records. Department of

4300 Coodfellow Blvd.

the Army forms and procedures used for equipment

maintenance will be those prescribed by DA PAM 738-

St. Louis, MO 63120-1798

750, the Army Maintenance Management System

Marine Corps users shall submit EIR's in accordance

(TAMMS)Marine Corps personnel will prepare and

with MCO 1650.17. They shall submit Quality Defi-

maintain records and report forms as prescribed by TM-

ciency Reports in accordance with MCO 4855.10. Mail

4700-15/1, Equipment Record Procedures.

directly to:

1-3. Destruction of Army Material to Prevent Enemy

Commanding General

Use. Refer to TM 750-244-3 for procedures for destruc-

Marine Corps Logistics Base (P840)

tion of this equipment to prevent enemy use.

Albany, CA 31704-5000

1-4. Administrative Storage. Refer to TM 740-90-1 for

Marine Corps users shall submit NAVMC Form 10772

procedures, forms, records, and inspections required

eporting Errors and Recommending Improvementsto:

during administrative storage of the PADS. Marine

Commandant of the Marine Corps

Corps users shall refer to MCO 4450.7 for this informa-

tion.

Headquarters, Marine Corps

Code LMA-1

1-5. Calibration. Refer to Chapter 4 for the PADS

Washington, DC 20380

Inertia] Measurement Unit MX-9832/USQ-70 (IMU)

reply will be sent directly to you.

alignment procedure.

Section Il. DESCRIPTION AND DATA

1-9. Auxiliary Equipment. Auxiliary equipment used at

1-7. Description. Description of PADS is contained in

direct support and general support maintenance consists

TM 5-6675-308-12. Marine Corps users shall refer to

of five standardized electrical components cases (transit

TM 08837A-12/1.

cases) illustrated in figure 1-1 anti listed in table 1-1.

These transit cases are used for transportation of the

1-8. Tabulated Data. PADS performance data and items

inertial measurement unit, control and display unit,

comprising an operable equipment are tabulated in TM

computer power supply, and power supply. A transit

5-6675-308-12. Marine Corps users shall refer to TM

case is provided with each spare unit.

08837A-12/l.

1-1

Change 5

Index

Privacy Statement
Press Release
Contact