TM5-6675-296-14
b. Night ro Dark-Day Operations. Refer to
4-10) .
c. High Angle Observations.
(2) Refer to figure 4-18 and install the
diagonal eyepieces.
microscope
(1) Remove the telescope and
NOTE: THEODOLITE MODEL T2 - 63MIL
SHOWN, INSTALL ALL DIAGONAL
EYEPIECES IN A SIMILAR MANNER.
-
NOTE: WHEN CHANGING TELESCOPE POSITIONS, THE
/
DIAGONAL EYEPIECE CAN BE ROTATED 180.
POSITION TELESCOPE DIAGONAL EYEPIECE
STEP 1.
ON TELESCOPE AND SECURE BY TURNING
LOCKING RING CLOCKWISE.
POSITION MICROSCOPE DIAGONAL EYEPIECE
STEP 2.
ON MICROSCOPE AND SECURE WITH LOCKING
TS 6875-296-14/4-18
LEVER.
(1) Remove retaining screws (fig. 4-17) and
remove the telescope eyepiece and reticle sleeve as
Serve eye damage can result from per-
an assembly.
forming observations against direct
(2) Position the autocollimation eyepiece in the
sunlight without utilizing the sunglasses
telescope eyepiece and secure with retaining
.
d. Autocollimation Eyepiece and Illumination
screws. Attach the autocollimation eyepiece
illumination to the bottom of the eyepiece.
(Model T2-56-C-MIL).
Section II. MOVEMENT TO A NEW WORKSITE
CAUTION
Always secure the telescope and horizontal
a. Short Distances. For short distances in
and compass circle clamps before moving
cleared, level areas, the operator may carry the
.
the instrument. Never carry the instrument
instrument mounted on the tripod. correct
over the shoulder.
carrying position is with tripod head cradled
b. Long Distance.
a g a i n s t t h e i n s t r u m e n t in a
(1) When moving t h e theodolite for long
vertical position.
Previous Page
