TM5-6675-296-14
f. Vertical Slow-Motion Screw. Refer to figure
NOTE: THEODOLITE MODEL T2 - 63MIL
SHOWN. ADJUST ALL MODELS
2-10 and adjust the vertical slow-motion screw.
IN A SIMILAR MANNER.
g. Horizontal Slow-Motion Screw. Refer to
screw.
h. Horizontal Circle Drive Knob. Refer to
figure
2-11 and adjust the horizontal circle drive knob.
OPEN THE KNOB COVER.
STEP 1.
TURN THE DRIVE KNOB UNTIL THE THREE
STEP 2.
SCREWS CAN BE SEEN THROUGH THE
HOLES IN THE KNOB.
LOOSEN THE THREE SCREWS JUST ENOUGH
STEP 3.
TO MOVE THE KNOB. MOVE THE KNOB UP
OR DOWN UNTIL IT TURNS SMOOTHLY
WITHOUT WHIPLASH.
TiGHTEN THE THREE SCREWS AND CLOSE
STEP 4.
THE KNOB COVER.
TS 6675-296-14/2-11