TM 5-6675-250-10
2-9. PREPARATION FOR MOVEMENT - Continued
MOVEMENT TO A NEW LOCATION - Continued
Be sure the white stripes on the alidade
index and the theodolite base are lined up
when installing the reference unit and tripod
in the transit case. Failure to do this will
result in damage to the reference mirror.
Install the GRU (1) into the transit case (2)
j.
with the theodolite end slightly lower than
the tripod end.
Fold in the GRU securing clamps (3) and
k.
place top section (4) of transit case over
bottom section. Secure with latches (5).
l.
If the hand-lamp assembly was used,
remove the hand-lamp from the ECU (1)
and store it in the cover (2) of the ECU.
Install cover (2) on ECU (1).
2-60
Previous Page
