TM 5-6675-250-10
Section III. OPERATION UNDER USUAL CONDITIONS
Avoid exposure of the equipment to dust, soil, or other abrasive materi-
als.
If equipment fails to operate, refer to troubleshooting procedures in
Exercise care when unloading the transport cases from vehicles. Do not
stand or walk on the cases, and do not stack more than three cases
high, as damage to the equipment may result. Use handles provided on
the cases for safety and ease of handling.
2-5. ASSEMBLY AND PREPARATION FOR USE
REMOVING TRANSPORT CASE FROM VEHICLE
Unfasten retaining straps (1).
a.
Remove transport case (2) from vehicle (3).
b.
UNPACKING EQUIPMENT
Transport Case
a.
( 1 ) Press pressure relief valve (1) to
release pressure in case.
(2) Unfasten latches (2) securing upper
section.
(3) Remove upper section (3).
(4) Inspect equipment for damage and
for loose or missing parts.
Previous Page
