TM 11-492-292-15
T-611/ASN, used in CH-54, AH-1G, and UH-1
mounting plate.
aircraft, inaccordance with figure 9-3 and the
(4) Connect the CX-10934/ASN to the
following instructions:
top connector of the turntable assembly.
(1) Remove the transmitter mounting
(5) Connect CX-10934/ASN clips to like-
plate and the four posts from the turntable
colored ML-1 leads.
assembly.
(2) Remove the following equipment from
ML-1, used in U-8 aircraft, in accordance with
the MK-1040A/ASN:
(a) Four turntable extension legs (part
(1) Remove CX-10934/ASN (W17 cable)
No. 2557345)
from the MK-1040A/ASN.
(b) MX-8112/ASM-339 (V).
(2) Mount the ML-1 on the transmitter
(3) For CH-54 aircraft, mount the T-611/
mounting plate.
ASN under the MX-8112/ASM-339 (V).
(3) Connect the CX-10934/ASN to the
top connector of the turntable assembly.
(4) For AH-1G and UH-1 aircraft, mount
the T-611/ASN on top of the MX-8112/ASM-
(4) Connect the CX-10934/ASN clips to
339(V).
like-colored ML-1 leads.
turnable assembly for AH-1G, CH-54 and UH-1 aircraft.
9-4
Previous Page
