C 3, TM 9-1290-335-35
over items 4, 5 and 6. Install clip (2) with screws (1), do
b.
Apply pressure on knob (7) while removing
not tighten.
screws (6) to prevent loss of spring loaded parts.
c.
Remove item 7 through 11.
d.
Depress bellows and drive out pin (12).
Note
e.
Remove item 13 through 15.
Do not
Position plug (5) tip flush with
remove pin (14A) unless it is necessary.
outside of casting and tighten
screws (1).
5-9. Disassembly of Window, 5355-706-8064,
Bellows, 1260-346-8644, and Related Parts
d.
Connect a 3-volt dc power source to plug (5)
Remove items 1 through 5 from item 6 (fig. 5-2).
in housing assembly and test lamps for illumination.
5-10. Removal of Related Parts-Housing Assembly
5-14. Installation and Assembly of Housing
7537556
Assembly 7537556 and Related Parts
a.
Remove items 1 through 4 (fig. 5-3).
a.
Install p)late (9, fig. 5-4) by driving in
b.
Use care in removing split washer (5) from
screws (8).
its mating groove to prevent loss of spring-loaded parts.
b.
Assemble items 7 through 1.
c.
Remove items 6 through 9.
5-15. Installation of Related Parts
Housing
5-11.
Removal and Disassembly of Housing
Assembly 7537556
Assembly 7537556 and Related Parts
a.
Install items 9 through 6 (fig. 5-3).
a.
Remove items 1 through 7 (fig. 5-4).
b.
Install split washer (5) "with undercut side
b.
Drive out screws (8) and remove item 9.
down.
c.
Install items 4 through 1.
5-12. Disassembly of Housing Assembly 7537556
5-16. Assembly of Window 5355-706- 8064, Bellows
and Related Parts
1260-346-8644 and Related Parts
a.
Remove items 1 through 14 (fig. 5-5).
b.
Inspect plug (5) terminal (9) and socket
assembly (14) for corrosion or damage. Inspect wires
Note
(6) and insulators (3 and 10) for deterioration, cracks,
Carefully tighten screws (2, fig. 5-2)
worn or frayed spots. Inspect connections for proper
as they will crack window (6).
Inspect bushing 5345810, which is not
removed from the housing 7537553, for excessive wear
Install items 5 through 1 to item 6 (fig. 5-2).
or other damage.
5-17. Installation of Re lated Parts Housing
5-13. Assembly of Housing Assembly 7537556 and
Assembly, 7537556
Related Parts
a.
Install items 15 through 6 (fig. 5-1).
a.
Assemble items 14 through 7 (fig. 5-5).
b.
Aline screws (4) in window (15) recesses
b.
Tighten item 7 securely for proper electrical
before tightening to hold clamp (5).
connection.
c.
Install spring (3) with bent ends in undercut
c.
Twist wires (6) together, insert wires in plug
of clamp (5). Install items 2 and 1.
(5) and tighten screw (4) securely, slide insulator (3)
5-3
Previous Page
