TM 55-1905-223-24-14
2-22. Replace Bulkhead Mounting Bracket. (FIGURE 2-16)
This task covers:
a. Removal,
b. Replacement.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's,
Compass secured. TM 55-1905-223-10.
Appropriate open scale repeater
Tool kit, electrician's,
removed, para. 2-18.
Materials/Parts
Bulkhead mounting, bracket
P/N 1976878-2
REMOVAL
a. On appropriate bulkhead mounting bracket (FIGURE 2-16), remove six screws (8) and washers (9) and remove
covet (5) from junction box (7) as far as cabling will allow.
b. On inside of junction box (7), tag and disconnect cable (1) from terminal board (6) TBI.
c.
Tag and disconnect system cable (3) connections from terminal board (6) TBI.
d. On top of junction box (7), remove cable (1) connector (10) from connector adapter and pull cable (1) out of
junction box.
e. On top of junction box (7), remove cable (3) cable gland (4) and pull cable (3) out of junction box.
CAUTION
The next step requires two soldiers to support bulkhead mounting bracket while
removing mounting hardware.
f.
Support bulkhead mounting bracket and removing three mounting bolts (2) from mounting holes and remove
bulkhead mounting bracket.
2-58
Previous Page
