ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
play exists, tighten the hexagon nuts on the foot
c. Circle-Setting Knob. To adjust the circle-setting
plates and on the extensions of the tripod head,
knob, turn the knob until three screws can be
The legs, when released from the horizontal
seen through the three holes in the face of the
knob, Carefully loosen these screws enough to
position, should fall to an angle of about 45
press the knob upward or downward to loosen or
degrees and remain there. Cheek the movement
tighten the movement.
of the legs and, if necessary, tighten the clamp-
ing screws under the head of the tripod.
d. Tripod. There should be no play at the junction
of the wood and metal parts of the tripod. If
5-14
Previous Page
