ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Table 4-14.1 IMU Testing.
Alignment. and Troubleshooting Using Tape Reader. Part No.
877406-2 -
Continued
Malfunction
indication/corrective action
Normal indication
Teat procedure
The fully loaded primary pallet weight
exceeds the two person lift criteria.
NOTE
If the CDU is used in lieu of the SPU,
enter SPH 800 to communicate with
the printer.
1v. If the system is not on the align.
ment surface, disconnect the test
equipment and place the system
on the alignment surface. The
porro prism should point 45 (10)
degrees to any cardinal heading
4-11d)
1w. install the IMU in the primary
pallet frame if not already in-
stalled
`4-90.4
Change 7