ARMY TM 5-8875-308-12
MARINE CORPS TM 08837A-12/1A
Legend for Figure 1-7Continued
Description
Index no.
Nomenclature
190-inch diameter by 38-inch long screws (two each) and
lockwashers (two each) to secure nut plate to CUCV dash
panel bracket.
0.250-inch diameter by 0.656-inch long screws (three each) and
lockwashers (three each) to secure CDU bracket to CUCV dash
panel bracket.
l/2-inch diameter by 3 l/2-inch long screw (five each), flat washer
(five each) and lockwasher (five each) to install adapter frame to
HMMWV cargo bed.
3/8-inch diameter by l-inch long screw (four each), flat washer
(four each) and lockwasher (four each) to install subfloor plate
on adapter frame in HMMWV.
0.375-24UNF x 1.75-in. lg cap screws (four each) and flat washers
(four each) to secure right and left brackets, from SUSV installation
kit, to primary pallet.
0.312-24UNF x 8.75-in. lg cap screw (six each) and flat washer
(six each) to secure primary pallet to mounting frame in SUSV.
No. 6-32UNC-2A x 0.312-in. lg screw (one each) to attach 10-in. lg
chain to quick-release pin on CDU bracket in SUSV.
No. 8mm x 1.25 x 50mm lg bolts (four each), flat washer (four
each), lockwasher (four each) and nut (four each) to install
frame assembly in SUSV.
Packing, O-ring 1.478-1.490 in. ID for CDU mount on SUSV.
5/16-24 x 7/8 lg screw (two each), 5/16 washer (two each),
5/16 x 24 lock nut (two each) to secure mounting frame in SUSV.
3/8-inch-24UNF x 3/4-inch long bolt (two each), flat washers (two
each), and lockwashers (two each) to install subfloor mounting
bracket, index no. 42.
NOTE
The following hardware is used on utility truck with
seat belts.
3/8-inch diameter by l-13/16-inch long bolt (two each) spacer
(two each) flat washer (two each), lockwasher (two each), and
nut (two each).
NOTE
The following hardware is used on utility truck
without seat belts.
3/8-inch diameter by l-inch long bolt (two each), flat washer
(two each), lockwasher (two each), and nut (two each).
1-18
Change 3
Previous Page
