TM 5-6675-306-14
b. Cleaning and Inspection.
(2) Clean plastic cover with a clean cloth dampened
with an approved solvent.
WARNING
(3) Inspect dust brush for loose, frayed, or broken
Dry cleaning solvent, P-D680, used to
bristles.
clean parts is potentially dangerous to
personnel and property. Avoid repeated
(4) Inspect plastic cover for cracks and rips.
and prolonged skin contact. Do not use
near open flame or excessive heat.
(5) Inspect chamois for rips and frays.
Flash point of solvent is 100 F.-138
F. (38 C.-59 C.)
(6) Replace defective dust brush, plastic cover or
(1) Clean lamp fittings with cloth dampened with an
chamois.
approved solvent.
4-27. Grease Container
(2) Inspect lamp fittings for worn or damaged
a. General. The grease container is used to store
threads, bent or broken metal parts, chips or
cracks.
approved lubricant.
b. Cleaning and Inspection.
(3) Replace defective lamp fittings.
WARNING
lamp fittings.
Dry cleaning solvent, P-D-680, used to
4-29. Accessory Case
clean parts is potentially dangerous to
a. General. The accessory case is used to stow all
personnel and property. Avoid repeated
accessories when not in use (fig. 2-5).
and prolonged skin contact. Do not use
near open flame or excessive heat.
b. Cleaning and Inspection.
Flash point of solvent is 100 F-
138F.(38C.-59C.)
(1) Clean grease container with a clean cloth
(1) Brush the accessory case free of dust and dirt.
dampened with an approved solvent.
(2) Inspect the accessory case for rips, torn straps,
(2) Inspect grease container for cracks, chips, and
and damage defects that would render it
wear.
unserviceable.
(3) Replace defective grease container.
(3) Replace defective accessory case.
4.28. Lamp Fittings
lamp fittings.
4-17
Previous Page
