TM 5-6675-270-15
(3) Remove the horizontal circle prism as-
sembly (para 5-10).
Outer Vertical Axis
(4) Refer to figure 5-7 and remove the hori-
a. Removal.
zontal circle housing and inner base as a unit.
(1) Remove the horizontal circle housing
(2) Refer to figure 5-8 and remove the hori-
zontal circle assembly and outer vertical axis as
a unit.
removal and installation.
b. Installation.
(1) Refer to figure 5-7 and install the hori-
zontal circle housing and inner base as a unit.
(2) Install the horizontal circle prism assem-
axis, removal and installation.
bly (para 5-10).
(3) Install the horizontal circle clamp assem-
b. Installation.
bly (para 5-19).
(1) Refer to figure 5-8 and install the hori-
(4) Install the tribrach assembly (para
zontal circle assembly and outer vertical axis.
(2) Install the horizontal circle housing
5-13. Horizontal Clamp Assembly
a. Removal
5-15. Optical Plummet
(1) Remove the horizontal circle housing
a. Removal.
(2) Refer to figure 5-6 and remove the
(1) Remove the horizontal circle assembly
horizontal clamp assembly.
b. Installation.
(2) Refer to figure 5-9 and remove the opti-
(1) Refer to figure 5-6 and install the hori-
cal plummet.
b. Installation.
zontal clamp assembly.
(2) Install the horizontal circle housing
(1) Refer to figure 5-9 and install the optical
plummet.
Previous Page
