TM 5-6675-270-15
DIRECT SUPPORT, GENERAL SUPPORT, AND
DEPOT MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
5-1. Tools and Equipment
5-1.
Specially
Designed
Tools
Tools, equipment, and repair parts issued with or
Reference
authorized for the theodolite are listed in the basic
Use
Item
issue items list, appendix C.
Adjustable
spanner
Remove
horizontal
wrench.
circle
housing.
5-2. Special Tools and Equipment
5-14
Remove
mirror
axis
a. No commercially available special tools or
nut.
equipment are required for direct support, general
Remove
clamp
pins.
5-19
support, and depot maintenance of the theodolite.
Remove
90
prism
5-34
sleeve
and
bracket.
Remove
compass
6-2
6-1
Assembly
tool.
general support, and depot maintenance per-
window
lockring.
sonnel performing major overhaul work on the
theodolite. These specially designed tools are not
5-3. Maintenance Repair Parts
available for issue but must be fabricated by
qualified direct support, general support, and
Repair parts and equipment are listed and illu-
depot maintenance personnel.
strated in TM 5-6675-270-25P.
Section II. TROUBLESHOOTING
5-4. General
5-5. Troubleshooting
This section provides information useful in diag-
Malfunctions which may occur are listed in table
nosing and correcting unsatisfactory operation or
5-2. Each malfunction stated is followed by a
failure of the theodolite and its components.
list of probable causes of the trouble. The correc-
tive action recommended is described opposite the
probable cause.
Previous Page
