TM 32-5865-010-24&P
c. Connector J1 and J2 Removal and Replacement. To remove con-
nector J1 (6) and/or J2 (7) from the unit, proceed as follows:
(1) Remove the rear panel as directed in paragraph 5-10b, step
1.
(2) Remove connector J1 (6) and\or J2 (7) by removing four
screws (8), washers (9), lock washers (10), and nuts (11)
from the connector.
(3) Tag and remove each wire from the connector using
appropriate removal tool. Then remove the connector from
the rear panel.
5-7.1/(5-7.2 blank
Previous Page
