TM
32-5865-010-24&P
The indicator portion of switch/indicators S1 thru S8 accepts
+28 V dc power on pin C. These pins are all connected to pin 42 of
connector J1,which is the +28 V dc power input pin for the unit. A
ground potential applied to switch/indicator contacts 1 and 4 will
illuminate the indicator portion. A ground potential applied to pin
30 of connector J1 will illuminate the indicator portion of switch/
indicator S1. Similarly, a ground potential at J1-32, J1-36, J1-34,
J1-38, J1-40, J1-44, and J2-E will illuminate the indicator portion
of switch/indicators S2 thru S8, respectively.
3-2
Previous Page
