TM 11-6625-2440-12
CHAPTER 2
INSTALLATION
WARNING
During installation of this equipment, conform to all safety requirements set forth in TB SIG 291. Injury or
DEATH could result from failure to comply with safe practices.
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
2-1. Packaging Data
2-3. Checking Unpacked Equipment
a. Inspect the equipment for damage that may
The two units of the test set are packed in separate
fiberboard cartons and cushioned with polyurethane ester
have occurred during shipment. If the equipment has-
foam. The following chart lists the contents, dimensions,
been damaged, fill out and forward DD Form 6 (para 1-
and shipping weights of the cartons.
3b).
Unit
b. Check to see that the equipment is complete
Carton
Carton
shipping
as listed in the packing slip. If a packing slip is not
Carton contents
dimensions
volume
weight
available, check the equipment against the listing in
(in.)
(in.3)
(lb)
Electronics unit
33 X 291/8 X 281/2
27,648
160
with TM 38-750. The equipment should be placed in
Control-display unit
33 X 291/8 X 281/2
27,648
160
service even though a minor assembly or part that does
not affect proper functioning is missing.
2-2. Unpacking Instructions
c. Check to see whether the equipment has been
CAUTION
modified. If the equipment has been modified, the MWO
number will appear on the front panel, near the
The control-display unit and electronics
identification plate. Check also to see whether all
unit contain delicate electronic gear. Be
MWO's current at the time the equipment is placed in
extremely careful when removing each
use, have been applied.
item from the container.
NOTE
a. Since the control-display unit and electronics
Current MWO's applicable to the equip-
unit are packaged in the same manner, only the
ment are listed in DA Pam 310-7.
unpacking of the electronics unit is illustrated.
d. Check the latest issue of DA Pam 310-4 (never
b.
more than 1 year old) and its latest changes (never more
than 6 months old) to see whether you have the latest
NOTE
editions of all applicable maintenance literature.
Save all packaging material for use in
(Equipment issued by depots may have been in stock for
reshipment of the test set.
some time and may contain superseded manuals.)
2-1